Lift The Dot

 
Lift The Dots are so called because of the Dot on the top of the socket which marks the spot to lift to release the fastening!
 
These well known fittings are widely used in the marine industry and comprise three parts: A Socket, Backing Plate and Stud.
 
Using the Socket as a template, mark the holes and cut a hole in the fabric including slots for the pins. Push the pins through the fabric and secure the Backing Plate by bending the pins over. This assembly easily locates over the Stud to complete the fastening.

Lift The Dots are made of Nickel Plated Brass.
 
Special shipping rates apply for deliveries to:
Highlands, Islands, Isle of Man, Channel Islands, Northern Ireland, Europe and the Rest of the World

Please contact us for a quotation
 
Lift The Dot Standard Socket and Plate
 
 
The Lift The Dot Socket and Plate is fitted to fabric to create the hole which the Lift The Dot Stud fits.
 
Overall Size: 22mm x 20mm
 
Pack of 10
6.75 GBP
Lift The Dot Standard Screw Stud 10mm
 
 
This Lift The Dot Screw Stud can be screwed directly in to a hard surface.
 
Stud Height: 14mm
 
Thread Length: 10mm (3/8")

Pack of 10
6.50 GBP
Lift The Dot Two Hole Base Stud Type P
 
 
This Lift The Dot Base is fitted to a hard surface with 2 screws (not included) creating a solid base fixing.
 
Height: 18mm
 
Distance between screw holes: 15mm
 
Pack of 10
 
Use our No 6 Stainless Screws
13.50 GBP
Lift The Dot Screw Stud Long
 
 
This Lift The Dot Screw Stud can be screwed directly in to a hard surface.
 
Stud Height: 14mm
 
Thread Length: 15mm (5/8")

Pack of 10
6.50 GBP
Lift The Dot Cloth Stud + Plate
 
 
This Lift The Dot Stud and Plate allows you to attach from cloth to cloth rather than cloth to hard surface.
 
Height: 18mm

Pack of 10
6.50 GBP
Lift the Dot Bolt Stud + Nut
 
 
This Lift The Dot Stud has a 8/32 UNC Thread and is supplied with a brass nut.
 
Stud Height: 14mm
 
Thread Length: 10mm
 
Pack of 10
8.30 GBP