Tools

 
All our tools are high quality and are used thoughout the Marine Industry. From Cutters and Seam Rippers to Cloth Marking Pencils, they are all selected to use with our other fabrics and products.
 
 
Special shipping rates apply for deliveries to:
Highlands, Islands, Isle of Man, Channel Islands, Northern Ireland, Europe and the Rest of the World

Please contact us for a quotation
 
 
Cutting Punch - 8mm Hole
 
These Cutting Punches cut holes in most fabrics and should be used in conjunction with soft-faced hammers (preferably with a dead-blow action) and a proper cutting board. This will not only ensure a good, clean cut but will extend the life of the cutter itself.
 
Hole Diameter: 8mm
16.10 GBP
Cutting Punch - 10mm Hole
 
These Cutting Punches cut holes in most fabrics and should be used in conjunction with soft-faced hammers (preferably with a dead-blow action) and a proper cutting board. This will not only ensure a good, clean cut but will extend the life of the cutter itself.
 
Hole Diameter: 10mm
14.70 GBP
Cutting Punch - 13mm Hole
 
These Cutting Punches cut holes in most fabrics and should be used in conjunction with soft-faced hammers (preferably with a dead-blow action) and a proper cutting board. This will not only ensure a good, clean cut but will extend the life of the cutter itself.
 
Hole Diameter: 13mm
16.20 GBP
Cutting Board 125 x 125
 
 
Use this Cutting Board with our Punches. This will not only ensure a good, clean cut but will extend the life of the cutter itself.
 
Board Size: 125cm x 125cm
 
 
8.85 GBP
Cloth Marker - White
 
These Cloth Marking Pencils can be used on most of our fabrics to mark an outline before cutting.
2.75 GBP
Cloth Marker - Red
 
These Cloth Marking Pencils can be used on most of our fabrics to mark an outline before cutting.
2.75 GBP
Seam Ripper
 
This Seam Ripper helps undo the seams of previously stitched material.

IMPORTANT - SHARP POINT - USE WITH CARE
3.80 GBP