Fasteners

 
Our range of Fasteners are all easy to fit and are suitable for outdoor use. They are made from Nickel Plated Brass and are used widely by professionals in the garden and leisure industry.
 
Snap Fasteners The system consists of a Cap (or Button), a Socket and a Stud (a Post can be added if a Cloth to Cloth Fastening is needed).

The method of fixing the fasteners is simple:
 
First a small hole is made in the fabric and the shaft of the Cap is pushed through. The Socket is then located over the end of the shaft and held in place by forming the shaft end around the inside of the socket.
 
This is done by using a punch - special tools are best (see below), but if only a few Snap Fastenings are to be fitted a suitable item can usually be found in most tool boxes.
 
With that half of the Fastener complete it is a question of simply clicking the fabric into place over the Stud (which is screwed to the hard surface)

Turnbuttons - Use the Eyelet as a template and mark the fabric for the main hole and slots for the pins. Cut the fabric using a sharp knife and push the pins through. Secure the washer by bending the pins over - this assembly is then located over the Turnbutton itself which is usually connected to solid surface. A quick turn completes the closure.
 
 
Special shipping rates apply for deliveries to:
Highlands, Islands, Isle of Man, Channel Islands, Northern Ireland, Europe and the Rest of the World

Please contact us for a quotation